Trapezoidal ridge (small)

The Trapezoidal ridge flashing is a typical flashing used for roof finishes. It is mounted at the top of the roof, at the junction of two roof slopes.

Where to buy? Download product card

Product description

RIDGE flashings

The ridge cap belongs to the group of roof ridge flashings. It is also very often called a “ridge tile” by roofers. The main role of these flashings is to protect the contact area of two roof slopes with opposite pitches, at the point where the roof ridge is located and the slopes meet. Ridge caps prevent rainwater from getting under the surface of the slopes, and additionally provide ventilation and significantly improve the aesthetic value of the roof. It is primarily a protective element installed on the highest edge of the roof slope, where two opposite slopes meet.

Trapezoidal ridge small cap

The TRAPEZOIDAL ridge flashing is one of 11 available models in our offer, functionally and aesthetically matched to all types of roofing we offer. It is made of the same materials as the roof tiles offered by our company. A wide range of colors and protective coatings is available. The TRAPEZOIDAL ridge flashing comes in two variants – Large and Small. Both have the same shape and pattern, but differ in individual dimensions, which makes it easier to match them to various roof slopes while maintaining a consistent style and appearance. The TRAPEZOIDAL Large ridge flashing is available here:

Trapezoidal ridge large cap

FLASHING MATCHING GUIDE

RIDGE flashings EAVES flashings VERGE flashings VALLEY flashings SIDEWALL flashings VENTILATION flashings

Technical specification of the coating

Thickness of coating

50 µm

Corrosion resistance

High ★★★★

UV resistance

High★★★★

Possibility of bending

High ★★★☆

Aesthetic guarantee

30 years

Technical guarantee

50 years

Available colours

0,5 mm

PUM R011

PUM R028

PUM R033

PUM R750

PUM RAL 7016

PUM RAL 8017

PURLAKpolyurethane, glossy

Technical specification of the coating

Thickness of coating

50 µm

Corrosion resistance

High★★★★

UV resistance

High ★★★☆

Possibility of bending

High ★★★☆

Aesthetic guarantee

30 years

Technical guarantee

50 years

Available colours

0,5 mm

PU RAL 7016

PU RAL 9005

TOPMATpoliyester, matt (Arcelor PL)

Technical specification of the coating

Thickness of coating

35 µm

Corrosion resistance

High ★★★★

UV resistance

High ★★★★

Possibility of bending

High★★★☆

Aesthetic guarantee

20 years

Technical guarantee

35 years

Available colours

0,5 mm

TOPMAT R033

TOPMAT R750

TOPMAT RAL 7016

TOPMAT RAL 8017

ULTRAMAT®poliyester, matt (Arcelor DE)

Technical specification of the coating

Thickness of coating

35 µm

Corrosion resistance

High ★★★★

UV resistance

High ★★★★

Possibility of bending

High ★★★☆

Technical guarantee

20 years

Available colours

0,5 mm

PMG R011

PMG R028

PMG R032

PMG R033

PMG R750

PMG RAL 7016

PMG RAL 8017

PMG35®poliyester, matt

Technical specification of the coating

Thickness of coating

35 µm

Corrosion resistance

High ★★★☆

UV resistance

Good ★★☆☆

Possibility of bending

Good ★★☆☆

Aesthetic guarantee

15 years

Technical guarantee

35 years

Available colours

0,5 mm

PMG R011

PMG R028

PMG R032

PMG R033

PMG R750

PMG RAL 7016

PMG RAL 8017

PS25poliyester, glossy

Technical specification of the coating

Thickness of coating

25 µm

Corrosion resistance

High ★★★☆

UV resistance

Good ★★☆☆

Possibility of bending

Good ★★☆☆

Aesthetic guarantee

10 years

Technical guarantee

30 years

Available colours

0,50 mm

R028

R032

RAL 1002

RAL 1015

RAL 1021

RAL 3000

RAL 3005

RAL 3016

RAL 5010

RAL 6005

RAL 6029

RAL 7000

RAL 7016

RAL 7024

RAL 7035

RAL 8004

RAL 8017

RAL 9002

RAL 9005

RAL 9006<br><span style="font-size: 7pt;">SILVER</span>

RAL 9006
SILVER

RAL 9007<br><span style="font-size: 7pt;">SILVER METALLIC</span>

RAL 9007
SILVER METALLIC

RAL 9010

Metallic coatings

Technical specification of the coating

Available colours

Basic coatings

AZ – aluzinc

OC – galvanized

Pruszyński Company guarantess realization of each order in one colour shade. Although due to technological process of covering paint to steel shets there is possibility for occuring difference in colour shade in different deliveries.

Regarding this please inform sales person if different delivery is continuation of previous orders.

Inspirations

Single -family House Tuczępa

A single -family house in Rytwiny

Single -family house, Staszów

Villa in Niepołomice

Arkadia Investment housing estate

Single -family house, Pliskowola

Sevilla Gold Hotel

Arena Grupa Azoty in Puławy

Kielce bus station

Avant -garde design in a public building

Końskie - gable

A single -family house in Rudna near Rzeszów

Flat metal sheet, single -family house in Rudna

Flat metal tile market, Orzysz

Trapeze

Tur

Modus

Detached house complex roof. Modus roof tile

Modus metal roof tile, multi -track roof

Mercedes

Leroy Merlin

Technical specification

General information

Length:

2 m

Thickness:

0,50

Coating

polyester gloss / polyester mat / polyurethane

Kalenica Trapezowa TYP2 (mała) - przekroj

Download

Production profile 2025

[PDF]

File version: 26.06

Download file

Copy

Do you have questions?

Is it possible to make copper machining at the steel roof?

When using copper, be careful because copper oxides are very aggressive and cause corrosion of other metals. Therefore, on buildings, it cannot be combined with other metal species (copper enters into contact and causes electrolytic corrosion of other metals).

Why is the metal roofing sheets recommended for the renovation of old roofs?

This is directly related to its low weight. In the case of old roofs, the trusses of the renovated houses are often somewhat damaged by time. Therefore, it is safer to use a metal roofing tile, which weight oscillates at 4.7 kg/m2, than almost ten times a heavier ceramic tile than it. However, it is always worth verifying the condition of the roof truss, with a specialist and make sure that it does not require renovation or replacement. In such cases, the safety of residents or building employees, as well as the assembly team, is always a priority. In most situations, however, the condition of the structure without major problems allows the use of roof tiles, while the use of ceramic tile would not be possible.

Can you use an angle grinder when cutting sheets?

Modern roofing exclude the use of angle grinders for cutting. The use of this method of cutting the material is associated with the loss of warranty.The angle grinder during operation and cutting produces very large amounts of heat, which in turn damages the edges of the sheet, as well as the coating covering it. In addition, the filings extracting during operation blend into the surface of the blades, additionally creating potential corrosion outbreaks.The right way of cutting sheet metal is to use automatic jumps (so -called Nilerler) or hand scissors. They use the mechanical force to cut the sheet, without exposing it to high temperature jumps. In addition, it is worth remembering that after cutting it is good to train cut places with dedicated protective varnish or special paint.

Does the roof require maintenance?

Yes, each roof requires periodic inspections to check if there have been any damage. Most of the products offered by Blachy Pruszyński have various types of specialized coatings available (covered by the warranty), increasing the life and durability of sheet metal. Maintenance consists mainly in removing the deposits and chimney dust, which left for a longer period of time can lead to sheet metal damage. Particular attention should be paid to places around chimneys that are sensitive due to more demanding operating conditions. If during the coverage inspection, local damage to the paint coating will be noticed, paint corrections should be made. In such a situation, the best solution is to use dedicated gloss paints tailored to a given coating. Such paints are in a stringent offer of Pruszyńska sheet and it is strongly recommended to use company products, recommended for a given coating.

How to register and how does the warranty work?

In order to register the warranty, download the warranty registration available in files for download / printing or directly: Warranty registration and send it completed to the following address: guarantee@pruszynski.euThe warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.

How can you complain the product, where is the information?

Complaints should be submitted in a warehouse in which the purchase was made. In the event that the wholesaler has been closed (does not run a business), the filled print of the complaint application should be sent directly to Pruszyński Sp. z o.o. to: pruszynski@pruszynski.eu

Printing of the complaint application is available in files for download / prints or directly here: Complaints

Może to Cię zainteresuje:

Blachy trapezowe

Zobacz ofertę

Others in this category

Price cut -30% Modular barge flashing (left, right)

Roof flashings - Verge flashings

Trapezoidal ridge (small)

Product description

RIDGE flashings

Trapezoidal ridge small cap

Tags

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Inspirations

Technical specification

General information

Discover the detailed offer

Download

Do you have questions?

Blachy trapezowe

Others in this category

See our offer of accessories

News