VENTSOL Akustic Soundproofing Tape

Foam tape for sealing and soundproofing. Material: cross-linked polyethylene with a silicone coating. Single-sided rubber adhesive coating.

Where to buy Download product card

Opis produktu

VENTSOL Akustic Soundproofing Tape

VENTSOL Akustic Laminated Acoustic Tape—designed for use on metal roofs to reduce noise caused by weather conditions.

VENTSOL Akustic tape is an excellent alternative for soundproofing roof panels. It can be used interchangeably with the^{SoundControl™} soundproofing mat.

When applied to the underside of the panels during assembly, it reduces noise levels by up to 6 dB. In terms of subjective perception, this translates to a reduction in the annoyance of sounds by up to 34%.

It is especially recommended for buildings with a usable attic, located in large open areas, and exposed to strong gusts of wind due to their location.

Inspirations

Single-family home in Ostrava

PD-510 Standing Seam Roof Panels

Single-family home in Stąporków

MODUS Metal Roof Tile

A single-family home in the village of Tumlin

MODUS Metal Roof Tile

Single-family home in the village of Przeczów

OPTIMA Metal Roof Tile

A single-family home and a garden shed in Wola Rzędzińska

SZAFIR Metal Roof Tile

Single-family home in Wola Rzędzińska

REN Metal Roof Tile

Single-family home in Rytwiany

MODUS Metal Roof Tile

Two-story single-family home in Józefów

STAND-UP SEAM ROOF PANELS

Single-family home in Białystok

REGLE Roof Panels

Single-family home in Bydgoszcz

STAND-UP SEAM ROOF PANELS

Single-family home in Końskie

REN metal roof tiles combine durability and aesthetics

Single-family home in Stąporków

The PŁASKA PLUS metal roof tile is an excellent choice for modern construction, and its flat surface is very popular among developers.

Single-family home in Wola Rzędzińska

TIGRA Metal Roof Tiles — the perfect solution for homeowners looking for a flat roof surface

Single-family home in Wymysłowo

The RUBIN metal roof tile is a harmonious blend of classic style and functionality.

Single-family home in Białystok

A classic with a modern twist. FIORD metal roof tiles used to cover a single-story house with a modern design.

Single -family House Tuczępa

A single -family house in Rytwiny

Single -family house, Staszów

Villa Niepołomice

Arkadia Investment housing estate

Single-family home, Pliskowola

A single -family house in Rudna near Rzeszów

Flat metal sheet, single -family house in Rudna

Gable-roofed house in Końskie

Trapeze

Modus

Detached house complex roof. Modus roof tile

Modus metal roof tile, multi -track roof

Technical specification

Technical information

VENTSOL Akustic laminated soundproofing tape, 5x100 mm (20 m/roll), is an alternative to acoustic nonwoven fabric (Sound Control) for soundproofing PD510 interlocking panels. It reduces noise by 4–6 dB.

Downloads

Profil produkcji

[PDF]

File version: 26.8

Download file

Copy

Do you have questions?

Does the roof need maintenance?

Yes, every roof requires periodic inspections to check for any damage. Most products offered by the Blachy Pruszyński Company are available with various types of specialized coatings (covered by Warranty) that increase the service life and durability of metal roofing. Maintenance mainly involves removing soot and chimney dust, which, if left for an extended period, can damage the metal sheeting. Particular attention should be paid to the areas around chimneys, which are critical due to more demanding operating conditions. If localized damage to the paint coating is noticed during an inspection of the roofing, touch-up painting should be performed. In such situations, the best solution is to use dedicated touch-up paints matched to the specific coating. The Blachy Pruszyński Company offers such paints as part of its regular product line, and it is strongly recommended to use the company’s products that are recommended for the specific coating.

Is it possible to install copper flashings on a steel roof?

Caution must be exercised when using copper, as copper oxides are highly corrosive and cause corrosion of other metals. For this reason, it must not be combined with other types of metals on buildings (copper reacts upon contact and causes electrolytic corrosion of other metals).

Can I use an angle grinder to cut sheets?

Modern roof coverings preclude the use of angle grinders for cutting. Using this method to cut the material will void the Warranty.
An angle grinder generates a great deal of heat during operation and cutting, which in turn damages the edges of the sheet metal as well as its protective coating. Additionally, the metal shavings produced during operation become embedded in the sheet metal’s surface, creating potential corrosion sites.
The proper way to cut sheet metal is to use automatic nibblers or hand shears. These tools use mechanical force to cut the sheet metal without exposing it to extreme temperature fluctuations. Additionally, it’s worth remembering that after cutting, it’s a good idea to protect the cut edges with a dedicated protective varnish or special paint.

Why are metal roof tiles recommended for renovating old roofs?

This is directly related to its light weight. In the case of old roofs, the roof trusses of renovated houses are often already somewhat worn down by time. Therefore, it is safer to use metal roof tiles, which weigh around 4.7 kg/m², rather than ceramic roof tiles, which are nearly ten times heavier. However, it’s always a good idea to have a specialist inspect the condition of the roof truss and confirm whether it requires renovation or replacement after all. In such cases, the safety of the building’s residents or employees, as well as the installation crew, is always the top priority. In most situations, however, the condition of the structure allows for the use of metal roof tiles without major issues, whereas the use of ceramic roof tiles would no longer be possible.

How can I advertise a product? Where can I find more information?

Complaints should be filed at the wholesale store where the purchase was made. If the wholesale store in question has closed (is no longer in business), the completed complaint form should be sent directly to Pruszyński Company at the following address: pruszynski@pruszynski.com.pl

A complaint form is available in the "Downloads / Forms" section or directly here: COMPLAINT FORM

How to register and how does the warranty work?

In order to register the warranty, download the warranty registration available in files for download / printing or directly:
Warranty registration and send it completed to the following address: guarantee@pruszynski.eu

The warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.

Panel with standing seam

See the offer

Other products in this category

Wkręty samowiercące typu OC do łączenia blach i cienkich konstrukcji do 6 mm

OC -type self -screw screws - 6mm

Bet metal fasteners

VENTSOL Akustic Soundproofing Tape

Opis produktu

VENTSOL Akustic Soundproofing Tape

Tags

Inspirations

Technical specification

Technical information

Discover the detailed offer

Downloads

Do you have questions?

Panel with standing seam

Other products in this category

News