The OVER-GUTTER flashing belongs to the eave flashings, placed along the lower edge of the roof (eave). It is made of galvanized sheet, 0.5mm thick, covered with a protective coating. Designed for standing seam panels, with additional perforation for improved ventilation.
Eaves flashings are one of the most important technical details of a roof, responsible not only for the aesthetic finishing of the slope edges, but above all for the proper functioning of the entire roofing system.
The most important tasks of eaves flashings include:
Particular attention should be paid to the correct connection of eaves flashings with the roof membrane, gutter system, and ventilation elements. An incorrectly executed eaves detail can lead to moisture in the thermal insulation, degradation of the wooden structure, and limited effectiveness of the roof slope ventilation.
The OVER-GUTTER flashing, often also referred to as a DRIP EDGE, is a roofing element responsible for draining water from the roof slope into the gutter. Its main role is to ensure the flowing water detaches from the slope and is redirected into the gutter. An additional element in the form of a so-called “hem” enables easy installation of standing seam panels and single-module roof tiles. Furthermore, special two-row ventilation improves air circulation under the roofing. Our offer includes a wide range of over-gutter flashings, including, among others, OVER-GUTTER flashings:
The gutter flashing, often also referred to as KAPINOS, is an element of the roof covering, responsible for draining water from the roof slope to the gutter. In addition, it protects the front strip and the wall of the building against rain, especially during heavy rainfall. Depending on the selected roofing, you can choose the most suitable variant of the gutter flashing. In our offer you will find:Gutter flashing: TYPE 1 - universal for metal roof tiles and panel metal roof tiles Gutter flashing: TYPE2 - for seam PANELS Gutter flashing: TYPE 3 - for seam PANELS with additional perforation gutter flashing: TYPE4 - for REGELE or FLAT and FLAT plus metal roof tiles Gutter flashing: TYP5 - a slightly different variant dedicated to REGLE, FLAT or FLAT PLUS metal roof tiles The TYP2 variant has been designed especially for seam PANELS. This shape is available in two varieties - classic and with perforation, providing additional ventilation of the roof sheet.
The Pruszyński Group has been supporting Polish volleyball for over 15 years and it is undoubtedly […]
Read morePlease be advised that on 01/03/2023 the Fincostal brand will be fully connected to Pruszyński sheet. Considering the interests of our contractors and clients, we took steps for this process to take place maximally smoothly, without any impact on the continuity of the offer and conditions.
Read moreWinter roofing training returned to the calendar again. The best roofers from all over Poland meet in Sokołów, gain knowledge, exchange techniques and discuss the development of the industry.
Read more
