OPTIMA - Custom roof tile

Product description

Roofing tile with character

Optima is a metal roof tile produced for a specific length.

The sheets are mounted classically like the other roof tiles in Blachy Pruszyński’s offer.

Optima is available in all coatings from our offer in 27 basic colors from the RAL and RR palette.

ATTENTION !!! When connecting sheets in the length, you should take the tabs – 30 mm front and 35 mm back. The sum of bookmarks for a sheet with full rear pressing is 65 mm

Technical specification of the coating

Thickness of coating

50 µm

Corrosion resistance

High ★★★★

UV resistance

High ★★★★

Possibility of bending

High ★★★☆

Aestetic warranty

30 years

Technical warranty

50 years

Available colours

PUM R011

PUM R028

PUM R033

PUM R750

PUM RAL 7016

PUM RAL 8017

PURLAKpolyurethane, glossy

Technical specification of the coating

Thickness of coating

50 µm

Corrosion resistance

High ★★★★

UV resistance

High ★★★☆

Possibility of bending

High ★★★☆

Aestetic warranty

30 years

Technical warranty

50 years

Available colours

PU RAL 7016

PU RAL 9005

TOPMAT®poliyester, matt (Arcelor DE)

Technical specification of the coating

Thickness of coating

35 µm

Corrosion resistance

High ★★★★

UV resistance

High ★★★★

Possibility of bending

High ★★★☆

Aestetic warranty

20 years

Technical warranty

35 years

Available colours

TOPMAT R033

TOPMAT R750

TOPMAT RAL 7016

TOPMAT RAL 8017

ULTRAMAT®poliyester, matt (Arcelor PL)

Technical specification of the coating

Thickness of coating

35 µm

Corrosion resistance

High ★★★★

UV resistance

High ★★★★

Possibility of bending

High ★★★☆

Aestetic warranty

15 years

Technical warranty

35 years

Available colours

0,5 mm

PMG R011

PMG R028

PMG R032

PS25poliyester, glossy

Technical specification of the coating

Thickness of coating

25 µm

Corrosion resistance

High ★★★☆

UV resistance

Good ★★☆☆

Possibility of bending

Good ★★☆☆

Aestetic warranty

10 years

Technical warranty

30 years

Available colours

0,5 mm

R028

R032

RAL 1002

RAL 1015

RAL 1021

RAL 3000

RAL 3005

RAL 3016

RAL 5010

RAL 6005

RAL 6029

RAL 7000

RAL 7016

RAL 7024

RAL 7035

RAL 8004

RAL 8017

RAL 9002

RAL 9005

RAL 9006<br><span style="font-size: 7pt;">SILVER</span>

RAL 9006
SILVER

RAL 9007<br><span style="font-size: 7pt;">SILVER METALLIC</span>

RAL 9007
SILVER METALLIC

RAL 9010

Special coloursother

Technical specification of the coating

Specjalna grupa kolorów o niestandardowym wyglądzie lub składzie. Prosimy o weryfikację dostępności danego kolory w zależności od powłoki, a także ceny przed zamówieniem.

Available colours

The PRUSZYŃSKI company guarantees the execution of each order in the same color (shade). However, due to the complexity of the coating processes, there may be differences in shades between individual deliveries.

Responsibility for the color is therefore limited to one delivery only.

In connection with the above, in the case of ordering sheets for a specific batch, please indicate on the order or inform the Trader that it is a continuation of the order and the delivery of a color sample.

In order to ensure color consistency of sandwich panels with other elements, such as flashings, they should be ordered from one supplier.

Inspirations

Single-family home in Ostrava

PD-510 Standing Seam Roof Panels

University Sports Center in Rzeszów

Single-family home in Stąporków

MODUS Metal Roof Tile

Orientarium, Łódź Zoo

The Breeding and Exhibition Orientarium Building at the Łódź Zoo

A single-family home in the village of Tumlin

MODUS Metal Roof Tile

Single-family home in the village of Przeczów

OPTIMA Metal Roof Tile

Car dealership in Mikołów

BMW M Dealership in Mikołów

A single-family home and a garden shed in Wola Rzędzińska

SZAFIR Metal Roof Tile

Single-family home in Wola Rzędzińska

REN Metal Roof Tile

Single-family home in Rytwiany

MODUS Metal Roof Tile

Two-story single-family home in Józefów

STAND-UP SEAM ROOF PANELS

Single-family home in Białystok

REGLE Roof Panels

Single-family home in Bydgoszcz

STAND-UP SEAM ROOF PANELS

Polonez Plus in Kielce

The Polonez Plus manufacturing plant in Kielce

Single-family home in Końskie

REN metal roof tiles combine durability and aesthetics

Pex-Pool Plus Dębica

"Dwór Dobarz" Guesthouse

REGLE roof panels, imitation wood shingles, Zakopane style

Single-family home in Stąporków

The PŁASKA PLUS metal roof tile is an excellent choice for modern construction, and its flat surface is very popular among developers.

Single-family home in Wola Rzędzińska

TIGRA Metal Roof Tiles — the perfect solution for homeowners looking for a flat roof surface

Single-family home in Wymysłowo

The RUBIN metal roof tile is a harmonious blend of classic style and functionality.

Single-family home in Białystok

A classic with a modern twist. FIORD metal roof tiles used to cover a single-story house with a modern design.

Single -family House Tuczępa

A single -family house in Rytwiny

Single -family house, Staszów

Villa w Niepołomicach

Arkadia Investment housing estate

Sevilla Gold Hotel

Single-family home, Pliskowola

Arena Grupa Azoty in Puławy

Kielce Bus Station

Avant-garde design in a public building

A single -family house in Rudna near Rzeszów

Flat metal sheet, single -family house in Rudna

Gable-roofed house in Końskie

Flat metal tile market, Orzysz

Trapeze

Modus

Detached house complex roof. Modus roof tile

Modus metal roof tile, multi -track roof

Mercedes

Leroy Merlin

Technical specification

General information

length of module:

350 mm

height of bending:

25 mm

height of profile:

35 mm

effective width:

1080 mm

total width:

~1179 mm

sheet thickness

0,50 mm

max. recommended length of sheet:

5315 mm

min. length of sheet:

750 mm

min. slope of roof:

9°

Length of full module sheets

Number of modules	length of sheet – OPTIMA 350/25
2	0,765
3	1,115
4	1,465
5	1,815
6	2,165
7	2,515
8	2,865
9	3,215
10	3,565
11	3,915
12	4,265
13	4,615
14	4,965
15	5,315*
16	5,665
17	6,015
18	6,365
19	6,715
20	7,065

* – maksymalna zalecana długość arkusza

Recommendations

Transport and storage

If the customer collects the product with his own means of transport, the vehicle shall have an open loading platform allowing for easy loading and unloading, with the length suitable for ordered sheets. The sheets shall not extend beyond the platform. Proper anchoring of the sheet packages for the transport will reduce the damage of the sheet paint coat due to abrasion.
It is of course the best to unload in original manufacturer packaging , using mechanical unloading equipment.
Unloading shall be carried out by the proper number of people, that is in the case of long sheets (ca. 6 linear metre) the sheets shall be unloaded by 6 people, three on each side. Special attention shall be paid not to friction one sheet against the other, bend the side edges or stretch the sheet. Steel sheet deformation during the unloading and moving can result in problems with proper installation (chinks in clamps).
Protective foil is used to safe the roof panels against mechanical damages. It should be removed directly at the assembly stage and it should protect panels against humidity and sun during the storage period. Non compliance with above rules may cause difficulties when removing the foil from sheets and dirty after the glue.

Maintenance and washing

In order to extend durability of roofs and elevations it’s recommended to check and conservative it.
Inspection – One time a year (it’s best in spring) there should be inspection of roof/elevation in order to early detection of possible damage.
Cleaning of steel sheet – Roof and elevation made of steel sheets require cleaning at least once a year. Stratifying dirt on steel sheet may cause uneven discoloration of lacquer (because of uneven impact of UV beams), and lower protection to corrosion(dust traps humidity on steel sheets which causes damage). Dirty and stained spots can be cleaned by soft brush and water (temp. max. 60c). If it is necessary it is permitted to use some light detergent (ph 6/7, max 10% solution). There also can be used pressed water(max. 100bar) to cleaning, however the beam of water cannot be applicated too near of surface of sheets(min. 30 cm), also it shouldn’t be perpendicularly to surface. Near the connections water beam should be directed to bottom, to avoid water of entering cracks near connections. With old surfaces of steel sheets we should deal with high cautiously. Cleaning should be conducted from top to bottom, and cleaned spots should be rinsed out immediately.
It is not permitted to use scouring powders, nitro solvent, chlorine liquor, aromatised substances, substances with Amon chloride or sodium.
Damages – Possible damages during guarantee should be consulted with Contractor of roof/elevation and can be repaired only with his written permission.Repair of damages on small surfaces is done with quick-drying varnish. However painting big surfaces should be done with special industrial paints to renovating coverings. Painting should be limited only to special damaged spots (scratches to steel, centres of corrosion etc.)Preparation of surface to painting should be done with generally accepted rules. It is necessary to precisely remove all signs of corrosion – best with special brush or close-grained sandpaper. Then that surface should be undusted, degreased and cleaned. To degrease extraction naptha or water with addition of surfactant(best with 1-2%solution of ammoniac) can be used. Repaired spots may be different in colour compared to original steel sheets because of natural impact of atmospheric phenomenon (ageing of varnish due to impact of UV radiation)
ATTENTION!– During inspecting, cleaning, conservation and repair all work safety regulations should be obeyed.Pruszyński Sp. z o.o. is not in charge of possible accidents during carrying out all following actions.

Download

EPD Declaration type III (trapezoidal sheets, steel profiles, steel cassettes, roof tiles)

[PDF]

File version: 24.8

Download file

Copy

EPD Certificates (trapezoidal sheets, steel profiles, steel cassettes, roof tiles)

[PDF]

File version: 24.8

Download file

Copy

Production profile 2026

[PDF]

File version: 26.06

Download file

Copy

Do you have questions?

Is it possible to install copper flashings on a steel roof?

Caution must be exercised when using copper, as copper oxides are highly corrosive and cause corrosion of other metals. For this reason, it must not be combined with other types of metals on buildings (copper reacts upon contact and causes electrolytic corrosion of other metals).

Why are metal roof tiles recommended for renovating old roofs?

This is directly related to its light weight. In the case of old roofs, the roof trusses of renovated houses are often already somewhat worn down by time. Therefore, it is safer to use metal roof tiles, which weigh around 4.7 kg/m², rather than ceramic roof tiles, which are nearly ten times heavier. However, it’s always a good idea to have a specialist inspect the condition of the roof truss and confirm whether it requires renovation or replacement after all. In such cases, the safety of the building’s residents or employees, as well as the installation crew, is always the top priority. In most situations, however, the condition of the structure allows for the use of metal roof tiles without major issues, whereas the use of ceramic roof tiles would no longer be possible.

Can I use an angle grinder to cut sheets?

Modern roof coverings preclude the use of angle grinders for cutting. Using this method to cut the material will void the Warranty.
An angle grinder generates a great deal of heat during operation and cutting, which in turn damages the edges of the sheet metal as well as its protective coating. Additionally, the metal shavings produced during operation become embedded in the sheet metal’s surface, creating potential corrosion sites.
The proper way to cut sheet metal is to use automatic nibblers or hand shears. These tools use mechanical force to cut the sheet metal without exposing it to extreme temperature fluctuations. Additionally, it’s worth remembering that after cutting, it’s a good idea to protect the cut edges with a dedicated protective varnish or special paint.

Does the roof need maintenance?

Yes, every roof requires periodic inspections to check for any damage. Most products offered by the Blachy Pruszyński Company are available with various types of specialized coatings (covered by Warranty) that increase the service life and durability of metal roofing. Maintenance mainly involves removing soot and chimney dust, which, if left for an extended period, can damage the metal sheeting. Particular attention should be paid to the areas around chimneys, which are critical due to more demanding operating conditions. If localized damage to the paint coating is noticed during an inspection of the roofing, touch-up painting should be performed. In such situations, the best solution is to use dedicated touch-up paints matched to the specific coating. The Blachy Pruszyński Company offers such paints as part of its regular product line, and it is strongly recommended to use the company’s products that are recommended for the specific coating.

How to register and how does the warranty work?

In order to register the warranty, download the warranty registration available in files for download / printing or directly:
Warranty registration and send it completed to the following address: guarantee@pruszynski.eu

The warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.

How can I advertise a product? Where can I find more information?

Complaints should be filed at the wholesale store where the purchase was made. If the wholesale store in question has closed (is no longer in business), the completed complaint form should be sent directly to Pruszyński Company at the following address: pruszynski@pruszynski.com.pl

A complaint form is available in the "Downloads / Forms" section or directly here: COMPLAINT FORM

Worth seeing

Trapezoidal sheets

See the offer

Others in this category

Loara

Custom -made metal roof tile

See product

Rubin

Custom -made metal roof tile

See product

Ren

Custom -made metal roof tile

See product

Szafir

Custom -made metal roof tile

See product

See our offer of accessories

Choose the best accessories for your roof!

Touch-up paints

Akcesoria dachowe

See product

Chimney sweep bench for roof tiles

Roof accessories

See product

Firma Blachy Pruszyński do swoich profili dachowych oferuje oryginalne uszczelki zapobiegające przedostanie się wody, śniegu czy też innych zanieczyszczeń. Również pod obróbkami (kalenicami, wiatrownicami, pasami nadrynnowymi) powinny być mocowane uszczelnienia. Dostarczane uszczelki mają kształt odpowiadający profilowi blachy zarówno w przypadku dachówek jak i blach trapezowych.

Seals

Roof accessories

See product

Ventilation eaves batten

Roof flashings - Ventilation flashing

See product

News

10.06.2026 CSR, Sports sponsorship

Ultra Duch Puszczy 2026 – The Blachy Pruszyński Team on the Courses of the Podlasie Ultramarathon

The Białowieża Forest, hundreds of kilometers of challenging routes, and the unique atmosphere of a cycling adventure. Our company was well represented at the Ultra Duch Puszczy 2026. Blachy Pruszyński was a partner of the event, actively supporting one of the most recognizable ultra-cycling events in Poland.

OPTIMA - Custom roof tile

Product description

Roofing tile with character

Tags

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Technical specification of the coating

Available colours

Inspirations

Technical specification

General information

Length of full module sheets

Recommendations

Transport and storage

Maintenance and washing

Discover the detailed offer

Download

Do you have questions?

Trapezoidal sheets

Others in this category

See our offer of accessories

News