NEW

OMEGA Ridge End Cap (Large)

OMEGA Ridge End Cap (Large) is a dedicated flashing installed at the peak of the ridge. It is specifically designed to be compatible exclusively with the OMEGA Ridge Cap (Large).

Where to buy? Product data sheet

Product description

RIDGE flashings

The ridge cap belongs to the group of roof ridge flashings. It is also very often called a “ridge tile” by roofers. The main role of these flashings is to protect the contact area of two roof slopes with opposite pitches, at the point where the roof ridge is located and the slopes meet. Ridge caps prevent rainwater from getting under the surface of the slopes, and additionally provide ventilation and significantly improve the aesthetic value of the roof. It is primarily a protective element installed on the highest edge of the roof slope, where two opposite slopes meet.

OMEGA ridge large end cap

Our offer includes pressed ridge end caps, available in both LARGE and SMALL variants. They are precisely designed and machine-manufactured using modern equipment, which ensures high precision and dimensional repeatability. This makes them perfectly compatible with our OMEGA ridge caps. We recommend purchasing them as a set.

This description applies to the OMEGA Ridge End Cap (Large). You can find the variant dedicated to the OMEGA Ridge End Cap (Small) at the following link:

Omega ridge small end cap

Discover our NEW Products – OMEGA Ridge End Cap large and small

FLASHING MATCHING GUIDE

RIDGE flashings EAVES flashings VERGE flashings VALLEY flashings SIDEWALL flashings VENTILATION flashings

Technical specification of the coating

thickness of coating

50 µm

corrosion resistance

High ★★★★

UV resistance

High ★★★★

possibility of bending

High ★★★★

aesthetic warranty

30 years

technical warranty

50 years

Available colours

PUM R033

PUM R750

PUM RAL 7016

PUM RAL 8017

TOPMAT *polyester matt (Arcelor DE)

Technical specification of the coating

thickness of coating

35 µm

corrosion resistance

High ★★★★

UV resistance

High ★★★☆

possibility of bending

High ★★★☆

aesthetic warranty

20 years

technical warranty

35 years

Available colours

TOPMAT R033

TOPMAT R750

TOPMAT RAL 7016

TOPMAT RAL 8017

The Pruszyński company guarantees the fulfillment of each individual order in the same color (shade). However, due to the complexity of coating processes, shade differences between separate deliveries may occur. Therefore, color liability is limited to a single delivery.

* The OMEGA Ridge End Cap (Large) is available only in PURMAT and TOPMAT coatings. Please note that the coating is visually fully consistent only when the main roofing is in the same coating and color. For other coatings, such as PMG35 or ULTRAMAT, even though they are matte, certain differences in shades may occur, even with the same color.

Other products in this category

Ridges

Ridge

NEW ! Omega ridge (small)

Ridge flashings

Roof flashings

Roof flashings

Roof flashings

Ridge

Ridge flashings

Trapezoidal ridge (small)

Ridge flashings

See product

Inspirations

Single -family House Tuczępa

A single -family house in Rytwiny

Single -family house, Staszów

Villa in Niepołomice

Arkadia Investment housing estate

Single -family house, Pliskowola

Sevilla Gold Hotel

Arena Grupa Azoty in Puławy

Kielce bus station

Avant -garde design in a public building

Końskie - gable

A single -family house in Rudna near Rzeszów

Flat metal sheet, single -family house in Rudna

Flat metal tile market, Orzysz

Trapeze

Tur

Modus

Detached house complex roof. Modus roof tile

Modus metal roof tile, multi -track roof

Mercedes

Leroy Merlin

Technical specification

General information

Length: total/covering

281 mm / 225 mm

Thickness:

0,50

Coating

Matt Polyurethane (4 color variants)
Matt Polyester (4 color variants)

Zakonczenie kalnicy OMEGA Duza - rysunek techniczny

Flashings availability and application table

Tabela dostępności i zastosowań obróbek blacharskich

Download

Production profile 2025

[PDF]

Wersja pliku: 25.3

Download file

Copy

Do you have questions?

Is it possible to make copper machining at the steel roof?

When using copper, be careful because copper oxides are very aggressive and cause corrosion of other metals. Therefore, on buildings, it cannot be combined with other metal species (copper enters into contact and causes electrolytic corrosion of other metals).

Why is the metal roofing sheets recommended for the renovation of old roofs?

This is directly related to its low weight. In the case of old roofs, the trusses of the renovated houses are often somewhat damaged by time. Therefore, it is safer to use a metal roofing tile, which weight oscillates at 4.7 kg/m2, than almost ten times a heavier ceramic tile than it. However, it is always worth verifying the condition of the roof truss, with a specialist and make sure that it does not require renovation or replacement. In such cases, the safety of residents or building employees, as well as the assembly team, is always a priority. In most situations, however, the condition of the structure without major problems allows the use of roof tiles, while the use of ceramic tile would not be possible.

Can you use an angle grinder when cutting sheets?

Modern roofing exclude the use of angle grinders for cutting. The use of this method of cutting the material is associated with the loss of warranty.The angle grinder during operation and cutting produces very large amounts of heat, which in turn damages the edges of the sheet, as well as the coating covering it. In addition, the filings extracting during operation blend into the surface of the blades, additionally creating potential corrosion outbreaks.The right way of cutting sheet metal is to use automatic jumps (so -called Nilerler) or hand scissors. They use the mechanical force to cut the sheet, without exposing it to high temperature jumps. In addition, it is worth remembering that after cutting it is good to train cut places with dedicated protective varnish or special paint.

Does the roof require maintenance?

Yes, each roof requires periodic inspections to check if there have been any damage. Most of the products offered by Blachy Pruszyński have various types of specialized coatings available (covered by the warranty), increasing the life and durability of sheet metal. Maintenance consists mainly in removing the deposits and chimney dust, which left for a longer period of time can lead to sheet metal damage. Particular attention should be paid to places around chimneys that are sensitive due to more demanding operating conditions. If during the coverage inspection, local damage to the paint coating will be noticed, paint corrections should be made. In such a situation, the best solution is to use dedicated gloss paints tailored to a given coating. Such paints are in a stringent offer of Pruszyńska sheet and it is strongly recommended to use company products, recommended for a given coating.

How to register and how does the warranty work?

In order to register the warranty, download the warranty registration available in files for download / printing or directly: Warranty registration and send it completed to the following address: guarantee@pruszynski.euThe warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.

How can you complain the product, where is the information?

Complaints should be submitted in a warehouse in which the purchase was made. In the event that the wholesaler has been closed (does not run a business), the filled print of the complaint application should be sent directly to Pruszyński Sp. z o.o. to: pruszynski@pruszynski.eu

Printing of the complaint application is available in files for download / prints or directly here: Complaints