Ventilation eaves batten

Ventilation flashing, installed on the eave. Recommended for both modular and custom-cut roof tiles. Available in polyester coatings and in one standard length – 1.2 rm (1200 mm)

Where to buy? Download the product card

Product description

VENTILATION FLASHINGS

VENTILATION FLASHINGS play an extremely important role in ensuring the long-term and trouble-free use of the roof. They are responsible for the correct ventilation of the roof slope, i.e., the free flow of air under the covering, thanks to which the covering naturally gets rid of moisture that accumulates on the inner side of the covering and, as a result of the condensation phenomenon, turns into water and moisture. In the long term, this moisture causes irreversible damage both to the roof framing and can also cause damage to the covering itself.

Ventilation eaves batten

The ventilation eaves batten is a dedicated ventilation flashing (supporting proper air circulation under the slope). The perforated “front” of the batten has small holes that ensure optimal roof ventilation while preventing birds and small rodents from getting under the covering. The batten can be used under any roof tile from Blachy Pruszyński. The surface of the batten is covered with a protective coating in the most popular colours , the same as all roof coverings available in the offer, ensuring the colour consistency of the roof.

Ventilation eaves battens on the eaves are an obligatory element when installing panel roof tiles , as they ensure proper air flow under the roof covering and prevent excessive water condensation. Moreover, they significantly facilitate the assembly of modular roof tiles.

Under-ridge strip

FLASHING MATCHING GUIDE

RIDGE flashings EAVES flashings VERGE flashings VALLEY flashings SIDEWALL flashings VENTILATION flashings

Color

Ventilation patch, as a functional element of the roof, mounted under the correct roof covering, occurs in basic, universal colors that match all roofs.

PMG R033

PMG RAL 7016

PMG RAL 8017

Inspirations

Single -family House Tuczępa

A single -family house in Rytwiny

Single -family house, Staszów

Villa in Niepołomice

Arkadia Investment housing estate

Single -family house, Pliskowola

Sevilla Gold Hotel

Arena Grupa Azoty in Puławy

Kielce bus station

Avant -garde design in a public building

Końskie - gable

A single -family house in Rudna near Rzeszów

Flat metal sheet, single -family house in Rudna

Flat metal tile market, Orzysz

Trapeze

Tur

Modus

Detached house complex roof. Modus roof tile

Modus metal roof tile, multi -track roof

Mercedes

Leroy Merlin

Others in this category

Under-ridge strip

Roof flashings

See product

Technical specification

General information

Download

Production profile 2025

[PDF]

Wersja pliku: 25.3

Download file

Copy

Do you have questions?

Is it possible to make copper machining at the steel roof?

When using copper, be careful because copper oxides are very aggressive and cause corrosion of other metals. Therefore, on buildings, it cannot be combined with other metal species (copper enters into contact and causes electrolytic corrosion of other metals).

Why is the metal roofing sheets recommended for the renovation of old roofs?

This is directly related to its low weight. In the case of old roofs, the trusses of the renovated houses are often somewhat damaged by time. Therefore, it is safer to use a metal roofing tile, which weight oscillates at 4.7 kg/m2, than almost ten times a heavier ceramic tile than it. However, it is always worth verifying the condition of the roof truss, with a specialist and make sure that it does not require renovation or replacement. In such cases, the safety of residents or building employees, as well as the assembly team, is always a priority. In most situations, however, the condition of the structure without major problems allows the use of roof tiles, while the use of ceramic tile would not be possible.

Can you use an angle grinder when cutting sheets?

Modern roofing exclude the use of angle grinders for cutting. The use of this method of cutting the material is associated with the loss of warranty.The angle grinder during operation and cutting produces very large amounts of heat, which in turn damages the edges of the sheet, as well as the coating covering it. In addition, the filings extracting during operation blend into the surface of the blades, additionally creating potential corrosion outbreaks.The right way of cutting sheet metal is to use automatic jumps (so -called Nilerler) or hand scissors. They use the mechanical force to cut the sheet, without exposing it to high temperature jumps. In addition, it is worth remembering that after cutting it is good to train cut places with dedicated protective varnish or special paint.

Does the roof require maintenance?

Yes, each roof requires periodic inspections to check if there have been any damage. Most of the products offered by Blachy Pruszyński have various types of specialized coatings available (covered by the warranty), increasing the life and durability of sheet metal. Maintenance consists mainly in removing the deposits and chimney dust, which left for a longer period of time can lead to sheet metal damage. Particular attention should be paid to places around chimneys that are sensitive due to more demanding operating conditions. If during the coverage inspection, local damage to the paint coating will be noticed, paint corrections should be made. In such a situation, the best solution is to use dedicated gloss paints tailored to a given coating. Such paints are in a stringent offer of Pruszyńska sheet and it is strongly recommended to use company products, recommended for a given coating.

How to register and how does the warranty work?

In order to register the warranty, download the warranty registration available in files for download / printing or directly: Warranty registration and send it completed to the following address: guarantee@pruszynski.euThe warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.

How can you complain the product, where is the information?

Complaints should be submitted in a warehouse in which the purchase was made. In the event that the wholesaler has been closed (does not run a business), the filled print of the complaint application should be sent directly to Pruszyński Sp. z o.o. to: pruszynski@pruszynski.eu

Printing of the complaint application is available in files for download / prints or directly here: Complaints