PS panel

Product description

Facade wall panels PS from Pruszyński is the highest quality modern solution of lightweight buildings made of sheet metal. With their appearance and function they resemble popular sidings, which are usually made of artificial materials (PVC) or wood.

The use instead of a quality galvanized sheet, which is additionally covered with a unique protective coating, is a much more favorable solution. Wall panels are characterized by higher mechanical parameters as well as much higher durability and resistance to UV rays (protective coatings).

The PS panel is a modern and aesthetic solution for covering the outer facade. Thanks to their shape, they create almost any patterns on the wall based on geometric shapes. In addition, a wide range of protective coatings color creates very interesting possibilities of combining shape with color to achieve a unique and unusual end result. In addition, the panels combine very well with various materials such as glass, concrete or other metals (aluminum).

This type of facade is most often found in commercial buildings – at sports facilities, office facilities, storage halls, while projects addressed to an individual client are increasingly appearing also using this solution – e.g. in single -family houses or housing estates.

Technical specification of the coating

Thickness of coating

35 µm

Corrosion resistance

High ★★★★

UV resistance

Good ★★☆☆

Possibility of bending

Good ★★☆☆

Technical warranty

15/35 years

Available colours

PMG R011

PMG R028

PMG R032

PMG R033

PMG R750

PMG RAL 7016

PMG RAL 8017

PS25polyester, glossy

Technical specification of the coating

hickness of coating

25 µm

corrosion resistance

High ★★★☆

UV resistance

Good ★★☆☆

possibility of bending

Good ★★☆☆

aesthetic warranty

10 years

Technical warranty

30 years

Available colours

All 0,5 mm 0,7 mm

All

R028

R032

RAL 1002

RAL 1015

RAL 1021

RAL 3000

RAL 3005

RAL 3011

RAL 3016

RAL 5010

RAL 6005

RAL 6029

RAL 7000

RAL 7016

RAL 7024

RAL 7035

RAL 8004

RAL 8017

RAL 9002

RAL 9005

RAL 9006<br><span style="font-size: 7pt;">SILVER</span>

RAL 9006
SILVER

RAL 9007<br><span style="font-size: 7pt;">SILVER METALLIC</span>

RAL 9007
SILVER METALLIC

RAL 9010

0,5 mm

R028

R032

RAL 1002

RAL 1015

RAL 1021

RAL 3000

RAL 3005

RAL 3016

RAL 5010

RAL 6005

RAL 6029

RAL 7000

RAL 7016

RAL 7024

RAL 7035

RAL 8004

RAL 8017

RAL 9002

RAL 9005

RAL 9006
SILVER

RAL 9007
SILVER METALLIC

RAL 9010

0,7 mm

RAL 1002

RAL 3011

RAL 3016

RAL 5010

RAL 6029

RAL 7016

RAL 7035

RAL 8017

RAL 9002

RAL 9006
SILVER

RAL 9007
SILVER METALLIC

RAL 9010

Pruszyński Company guarantess realization of each order in one colour shade. Although due to technological process of covering paint to steel shets there is possibility for occuring difference in colour shade in different deliveries.

Regarding this please inform sales person if different delivery is continuation of previous orders.

Celem zapewnienia spójności kolorystycznej płyty warstwowych z innymi elementami takimi jak np. obróbki blacharskie należy zamawiać je u jednego dostawcy.

Inspirations

Single-family home in Ostrava

PD-510 Standing Seam Roof Panels

University Sports Center in Rzeszów

Single-family home in Stąporków

MODUS Metal Roof Tile

Orientarium, Łódź Zoo

The Breeding and Exhibition Orientarium Building at the Łódź Zoo

A single-family home in the village of Tumlin

MODUS Metal Roof Tile

Single-family home in the village of Przeczów

OPTIMA Metal Roof Tile

Car dealership in Mikołów

BMW M Dealership in Mikołów

A single-family home and a garden shed in Wola Rzędzińska

SZAFIR Metal Roof Tile

Single -family House Tuczępa

A single -family house in Rytwiny

Single -family house, Staszów

Villa in Niepołomice

Arkadia Investment housing estate

Single -family house, Pliskowola

Sevilla Gold Hotel

Arena Grupa Azoty in Puławy

Kielce bus station

Avant -garde design in a public building

Końskie - gable

A single -family house in Rudna near Rzeszów

Flat metal sheet, single -family house in Rudna

Flat metal tile market, Orzysz

Trapeze

Modus

Detached house complex roof. Modus roof tile

Modus metal roof tile, multi -track roof

Mercedes

Leroy Merlin

Technical specification

General information

Wall panels are available in two variants of utility wide.155 /215 mm - made of sheet metal 0.5 to 0.7 mmand315 mm - which is produced only 0.7 mm thick sheetWe also sensitize our clients to the specifics of assembly and compliance with assembly recommendations in the case of this product. They are described in detail in the section: cutting and assembly

Effective width:

155 / 215 mm
---
315 mm

Thickness

0,5 - 0,7 mm
---
0,7 mm

Min. length:

0,8 m

Max. length:

8 m

Coating

polyester gloss/mat, polyurethane

Recommendations

Transport and storage

Transport of trapezoidal sheets should be done with special vehicle which shall have an open loading platform allowing easy loading and unloading, with the length suitable for ordered sheets. The sheets shall not extend beyond the platform otherwise it may cause damage and in consequence loss of the guarantee . The steel sheets must be protected against drifting and soaking.
Unloading shall be carried out by the proper number of people, that is in the case of long sheets (ca. 6linear metre) the sheets shall be unloaded by 6 people, three on each side.
Special attention shall be paid not to friction one sheet against the other, bend the side edges or stretch the sheet. Steel sheet deformation during the unloading and moving can result in problems with proper installation (chinks in clamps). It is of course the best to unload in original manufacturer packaging , using mechanical unloading equipment.
Special carefulness should be maintained during unloading in winter and during storing in heated warehouses.
Transport of trapezoidal sheets should be done with special vehicle which shall have an open loading platform allowing easy loading and unloading, with the length suitable for ordered sheets. The sheets shall not extend beyond the platform otherwise it may cause damage and in consequence loss of the guarantee . The steel sheets must be protected against drifting and soaking.
Unloading shall be carried out by the proper number of people, that is in the case of long sheets (ca. 6linear metre) the sheets shall be unloaded by 6 people, three on each side.
Special attention shall be paid not to friction one sheet against the other, bend the side edges or stretch the sheet. Steel sheet deformation during the unloading and moving can result in problems with proper installation (chinks in clamps). It is of course the best to unload in original manufacturer packaging , using mechanical unloading equipment.
Special carefulness should be maintained during unloading in winter and during storing in heated warehouses.

Cutting and assembly

To cut sheets should be used special roofer’s cutter. After assembly all filing and turnigs should be removed form surface of roof. In case of any damages, it should be repaired immidiately with proper touch up paint.
In case of using grinding machine, any complaints wont be accepted.
Other information can be found in assembly instruction to specific product.

Maintenance and cleaning

In order to extend durability of roofs and elevations it’s recommended to check and conservative it.
Inspection – One time a year (it’s best in spring) there should be inspection of roof/elevation in order to early detection of possible damage.
Cleaning of steel sheet – Roof and elevation made of steel sheets require cleaning at least once a year. Stratifying dirt on steel sheet may cause uneven discoloration of lacquer (because of uneven impact of UV beams), and lower protection to corrosion(dust traps humidity on steel sheets which causes damage). Dirty and stained spots can be cleaned by soft brush and water (temp. max. 60c). If it is necessary it is permitted to use some light detergent (ph 6/7, max 10% solution). There also can be used pressed water(max. 100bar) to cleaning, however the beam of water cannot be applicated too near of surface of sheets(min. 30 cm), also it shouldn’t be perpendicularly to surface. Near the connections water beam should be directed to bottom, to avoid water of entering cracks near connections. With old surfaces of steel sheets we should deal with high cautiously. Cleaning should be conducted from top to bottom, and cleaned spots should be rinsed out immediately.
It is not permitted to use scouring powders, nitro solvent, chlorine liquor, aromatised substances, substances with Amon chloride or sodium.
Damages – Possible damages during guarantee should be consulted with Contractor of roof/elevation and can be repaired only with his written permission.Repair of damages on small surfaces is done with quick-drying varnish. However painting big surfaces should be done with special industrial paints to renovating coverings. Painting should be limited only to special damaged spots (scratches to steel, centres of corrosion etc.)Preparation of surface to painting should be done with generally accepted rules. It is necessary to precisely remove all signs of corrosion – best with special brush or close-grained sandpaper. Then that surface should be undusted, degreased and cleaned. To degrease extraction naptha or water with addition of surfactant(best with 1-2%solution of ammoniac) can be used. Repaired spots may be different in colour compared to original steel sheets because of natural impact of atmospheric phenomenon (ageing of varnish due to impact of UV radiation)
ATTENTION!– During inspecting, cleaning, conservation and repair all work safety regulations should be obeyed.Pruszyński Sp. z o.o. is not in charge of possible accidents during carrying out all following actions.

Do you have questions?

Is it possible to make copper machining at the steel roof?

When using copper, be careful because copper oxides are very aggressive and cause corrosion of other metals. Therefore, on buildings, it cannot be combined with other metal species (copper enters into contact and causes electrolytic corrosion of other metals).

Why is the metal roofing sheets recommended for the renovation of old roofs?

This is directly related to its low weight. In the case of old roofs, the trusses of the renovated houses are often somewhat damaged by time. Therefore, it is safer to use a metal roofing tile, which weight oscillates at 4.7 kg/m2, than almost ten times a heavier ceramic tile than it. However, it is always worth verifying the condition of the roof truss, with a specialist and make sure that it does not require renovation or replacement. In such cases, the safety of residents or building employees, as well as the assembly team, is always a priority. In most situations, however, the condition of the structure without major problems allows the use of roof tiles, while the use of ceramic tile would not be possible.

Can you use an angle grinder when cutting sheets?

Modern roofing exclude the use of angle grinders for cutting. The use of this method of cutting the material is associated with the loss of warranty.The angle grinder during operation and cutting produces very large amounts of heat, which in turn damages the edges of the sheet, as well as the coating covering it. In addition, the filings extracting during operation blend into the surface of the blades, additionally creating potential corrosion outbreaks.The right way of cutting sheet metal is to use automatic jumps (so -called Nilerler) or hand scissors. They use the mechanical force to cut the sheet, without exposing it to high temperature jumps. In addition, it is worth remembering that after cutting it is good to train cut places with dedicated protective varnish or special paint.

Does the roof require maintenance?

Yes, each roof requires periodic inspections to check if there have been any damage. Most of the products offered by Blachy Pruszyński have various types of specialized coatings available (covered by the warranty), increasing the life and durability of sheet metal. Maintenance consists mainly in removing the deposits and chimney dust, which left for a longer period of time can lead to sheet metal damage. Particular attention should be paid to places around chimneys that are sensitive due to more demanding operating conditions. If during the coverage inspection, local damage to the paint coating will be noticed, paint corrections should be made. In such a situation, the best solution is to use dedicated gloss paints tailored to a given coating. Such paints are in a stringent offer of Pruszyńska sheet and it is strongly recommended to use company products, recommended for a given coating.

How to register and how does the warranty work?

In order to register the warranty, download the warranty registration available in files for download / printing or directly: Warranty registration and send it completed to the following address: guarantee@pruszynski.euThe warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.

How can you complain the product, where is the information?

Complaints should be submitted in a warehouse in which the purchase was made. In the event that the wholesaler has been closed (does not run a business), the filled print of the complaint application should be sent directly to Pruszyński Sp. z o.o. to: pruszynski@pruszynski.eu

Printing of the complaint application is available in files for download / prints or directly here: Complaints

Worth seeing

Trapezoidal sheets

See the offer

See our offer of accessories

Akcesoria dachowe

TORX self-drilling screws (staples)

Fasteners for trapezoidal sheets, roof tiles, karo panels (short)

See product

Roofing seals

Roof accessories

See product

News

10.06.2026 CSR, Sponsoring sportowy

Ultra Duch Puszczy 2026 – The Blachy Pruszyński Team on the Courses of the Podlasie Ultramarathon

The Białowieża Forest, hundreds of kilometers of challenging routes, and the unique atmosphere of a cycling adventure. Our company was well represented at the Ultra Duch Puszczy 2026. Blachy Pruszyński was a partner of the event, actively supporting one of the most recognizable ultra-cycling events in Poland.

09.06.2026 Business

Lubusz Branch of the Polish Roofers' Association — Report on the Opening Ceremony

On May 29, 2026, the Lubuskie Branch of the Polish Roofers’ Association was officially launched at […]

05.06.2026 CSR, Sponsoring sportowy

Byśkiniewicz and Jastrzębski Back on the Podium—2nd Place in the Nadwiślański Rally

Łukasz Byśkiniewicz and Łukasz Jastrzębski stood on the podium of the Polish Rally Championship for the second time in a row. The TVN TURBO RALLY TEAM crew took 2nd place in the 10th anniversary edition of the Nadwiślański Rally, confirming their strong form at the start of the season and remaining among the top contenders in the RSMP overall standings.