Coated sheets (nano-WAVE)

Product description

In our offer, next to typical flashings, there is also a flat sheet coated in sheets. Standard available sheets are offered in dimensions 1.25 x 2.00 MB.

Flat sheet sheets are available in most types of protective coatings from our offer, allowing the sheet of sheet to match the most common roofing.

New in our offer are sheets of flat sheet metal in nano-Fali. As the only ones on the market, we offer such sheets at our clients’ disposal. Almost invisible micro -creations give the effect of hiding small reflections of sheet metal. With the introduction of Nano-Fali, we also expand the range of all typical flashings with a nano-fala variant.

Thanks to the micro -creases, the processing seems smaller and devoid of imperfections associated with minor reflections or imperfections caused during assembly.

The sheet in the sheets, both flat and in the nano-Fala variant has a wide range of applications, mainly in the area of roof finishes. It offers performers and the implementation of both simpler and completely unusual flashings. It is also often used as complementary with heavy covering, as a complement that drastically reduces the costs of unusual finishes and machining for roofs with such covering.

Technical specification of the coating

thickness of coating

25 µm

corrosion resistance

High ★★★☆

UV resistance

Good ★★☆☆

possibility of bending

Good ★★☆☆

Aesthetic warranty

10 years

Technical warranty

30 years

Available colours

RAL 9010

Golden Oak

RAL 9002

RR 032

RAL 3011

RR 028

RAL 3005

RAL 1002

RAL 8023

RAL 1015

RAL 3016

RAL 1021

RAL 6005

RAL 8004

RAL 5010

RAL 7000

RAL 6029

RAL 8017

RAL 9005

RAL 7016

RAL 7024

RAL 7035

RAL 9007

RAL 9006

Polyester mat PM 35um

Technical specification of the coating

thickness of coating

35 µm

corrosion resistance

High ★★★☆

corrosion resistance

Good ★★☆☆

possibility of bending

Good ★★☆☆

Aesthetic warranty

15 years

Technical warranty

35 years

Available colours

TOPMAT

Technical specification of the coating

thickness of coating

35 µm

corrosion resistance

High ★★★★

UV resistance

High ★★★★

possibility of bending

High ★★★☆

Aesthetic warranty

20 years

Technical warranty

35 years

Available colours

TOPMAT RAL 7016

TOPMAT RR 033

TOPMAT RAL 8017

TOPMAT RR 750

PURMAX

Technical specification of the coating

thickness of coating

40 µm

corrosion resistance

High ★★★★

UV resistance

High ★★★★

possibility of bending

High ★★★☆

Aesthetic warranty

20 years

Technical warranty

40 years

Available colours

PURLAK

Technical specification of the coating

thickness of coating

50 µm

corrosion resistance

High ★★★★

UV resistance

High ★★★☆

possibility of bending

High ★★★☆

Aesthetic warranty

up to 30 years

Technical warranty

50 years

Available colours

PU RAL 7016

PU RAL 9005

PU RAL 8017

PU RR 028

PU RAL 8004

PURMAT

Technical specification of the coating

thickness of coating

50 µm

corrosion resistance

High ★★★★

UV resistance

High ★★★★

possibility of bending

High ★★★☆

Aesthetic warranty

up to 30 years

Technical warranty

50 years

Available colours

PUM RAL 7016

PUM RR 033

PUM RAL 8017

PUM RR 028

PUM RR 011

PUM RR 750

Firma PRUSZYŃSKI gwarantuje każdorazowo realizację poszczególnego zamówienia w jednakowym kolorze (odcieniu). Z uwagi na skomplikowanie procesów powlekania możliwe jest jednak występowanie różnic w odcieniach pomiędzy poszczególnymi dostawami.

Odpowiedzialność za kolor w związku z tym ograniczona jest jedynie do jednej dostawy.

W związku z powyższym w przypadku domawiania blach do konkretnej partii bardzo prosimy o zaznaczenie na zamówieniu lub poinformowanie Handlowca, iż jest to kontynuacja zlecenia oraz dostarczenia próbki kolorystycznej.

Celem zapewnienia spójności kolorystycznej płyty warstwowych z innymi elementami takimi jak np. obróbki blacharskie należy zamawiać je u jednego dostawcy.

Pruszyński Company guarantees realization of each order in one colour shade. Although due to technological process of covering paint to steel sheets there is possibility for occurring difference in colour shade in different deliveries. Regarding this please inform sales person if different delivery is continuation of previous orders. In order to ensure color consistency of sandwich panels with other elements such as flashings, they should it ordered from one supplier.

Inspirations

Single -family House Tuczępa

A single -family house in Rytwiny

Single -family house, Staszów

Villa in Niepołomice

Arkadia Investment housing estate

Single -family house, Pliskowola

Sevilla Gold Hotel

Arena Grupa Azoty in Puławy

Kielce bus station

Avant -garde design in a public building

Końskie - gable

A single -family house in Rudna near Rzeszów

Flat metal sheet, single -family house in Rudna

Flat metal tile market, Orzysz

Trapeze

Tur

Modus

Detached house complex roof. Modus roof tile

Modus metal roof tile, multi -track roof

Mercedes

Leroy Merlin

Technical specification

General information

Length:

2,00 m

Width:

1,25 m

Thickness:

0,50 mm

Coating

glossy polyester / matt polyester / polyurethane

Download

Production profile

[PDF]

Download file

Do you have questions?

Is it possible to make copper machining at the steel roof?

When using copper, be careful because copper oxides are very aggressive and cause corrosion of other metals. Therefore, on buildings, it cannot be combined with other metal species (copper enters into contact and causes electrolytic corrosion of other metals).

Why is the metal roofing sheets recommended for the renovation of old roofs?

This is directly related to its low weight. In the case of old roofs, the trusses of the renovated houses are often somewhat damaged by time. Therefore, it is safer to use a metal roofing tile, which weight oscillates at 4.7 kg/m2, than almost ten times a heavier ceramic tile than it. However, it is always worth verifying the condition of the roof truss, with a specialist and make sure that it does not require renovation or replacement. In such cases, the safety of residents or building employees, as well as the assembly team, is always a priority. In most situations, however, the condition of the structure without major problems allows the use of roof tiles, while the use of ceramic tile would not be possible.

Can you use an angle grinder when cutting sheets?

Modern roofing exclude the use of angle grinders for cutting. The use of this method of cutting the material is associated with the loss of warranty.The angle grinder during operation and cutting produces very large amounts of heat, which in turn damages the edges of the sheet, as well as the coating covering it. In addition, the filings extracting during operation blend into the surface of the blades, additionally creating potential corrosion outbreaks.The right way of cutting sheet metal is to use automatic jumps (so -called Nilerler) or hand scissors. They use the mechanical force to cut the sheet, without exposing it to high temperature jumps. In addition, it is worth remembering that after cutting it is good to train cut places with dedicated protective varnish or special paint.

Does the roof require maintenance?

Yes, each roof requires periodic inspections to check if there have been any damage. Most of the products offered by Blachy Pruszyński have various types of specialized coatings available (covered by the warranty), increasing the life and durability of sheet metal. Maintenance consists mainly in removing the deposits and chimney dust, which left for a longer period of time can lead to sheet metal damage. Particular attention should be paid to places around chimneys that are sensitive due to more demanding operating conditions. If during the coverage inspection, local damage to the paint coating will be noticed, paint corrections should be made. In such a situation, the best solution is to use dedicated gloss paints tailored to a given coating. Such paints are in a stringent offer of Pruszyńska sheet and it is strongly recommended to use company products, recommended for a given coating.

How to register and how does the warranty work?

In order to register the warranty, download the warranty registration available in files for download / printing or directly: Warranty registration and send it completed to the following address: guarantee@pruszynski.euThe warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.

How can you complain the product, where is the information?

Complaints should be submitted in a warehouse in which the purchase was made. In the event that the wholesaler has been closed (does not run a business), the filled print of the complaint application should be sent directly to Pruszyński Sp. z o.o. to: pruszynski@pruszynski.eu

Printing of the complaint application is available in files for download / prints or directly here: Complaints