PROFIL Σ | thickness | weight | H | h | B |
---|---|---|---|---|---|
mm | kg/m | mm | mm | mm | |
Σ 140 | 1,50 | 3,84 | 140 | 30 | 70 |
2,00 | 5,12 | 140 | 30 | 70 | |
2,50 | 6,24 | 140 | 30 | 70 | |
3,00 | 7,39 | 140 | 30 | 70 | |
Σ 170 | 1,50 | 4,2 | 170 | 60 | 70 |
2,00 | 5,6 | 170 | 60 | 70 | |
2,50 | 6,84 | 170 | 60 | 70 | |
3,00 | 8,21 | 170 | 60 | 70 | |
Σ 200 | 1,50 | 4,56 | 200 | 90 | 70 |
2,00 | 6,08 | 200 | 90 | 70 | |
2,50 | 7,44 | 200 | 90 | 70 | |
3,00 | 8,93 | 200 | 90 | 70 | |
Σ 230 | 1,50 | 4,96 | 230 | 120 | 70 |
2,00 | 6,56 | 230 | 120 | 70 | |
2,50 | 8,04 | 230 | 120 | 70 | |
3,00 | 9,65 | 230 | 120 | 70 | |
Σ 260 | 1,50 | 5,28 | 260 | 150 | 70 |
2,00 | 7,04 | 260 | 150 | 70 | |
2,50 | 8,64 | 260 | 150 | 70 | |
3,00 | 10,37 | 260 | 150 | 70 | |
Σ 300 | 1,50 | 5,76 | 300 | 190 | 70 |
2,00 | 7,68 | 300 | 190 | 70 | |
2,50 | 9,44 | 300 | 190 | 70 | |
3,00 | 11,33 | 300 | 190 | 70 | |
Σ 350 | 1,50 | 6,36 | 350 | 240 | 70 |
2,00 | 8,42 | 350 | 240 | 70 | |
2,50 | 10,44 | 350 | 240 | 70 | |
3,00 | 12,53 | 350 | 240 | 70 |
Profile Sigma is one of the most used cold-bended steel profile. In steel constructions of halls is used as spandrel beam and roof purlin as well as part of steel columns.
Fast and easy assembly is enabled by possibilty of preparing profiles with ready holes. There are 3 possible type of holes:
E – wymiar od szerokiej półki Bg
Rozmieszczenie otworów
Profil Z/C | grubość blachy | E | F |
---|---|---|---|
mm | mm | mm | |
Z/C 100 | 1,5 | 25,8 | 50 |
2 | 26 | 50 | |
2,5 | 26,3 | 50 | |
3 | 26,5 | 50 | |
Z/C 150 | 1,5 | 25,8 | 50 |
2 | 26 | 50 | |
2,5 | 26,3 | 50 | |
3 | 26,5 | 50 | |
Z 180 | 1,5 | 50,8 | 80 |
2 | 51 | 80 | |
2,5 | 51,3 | 80 | |
3 | 51,5 | 80 | |
Z/C 200 | 1,5 | 50,8 | 100 |
2 | 51 | 100 | |
2,5 | 51,3 | 100 | |
3 | 51,5 | 100 | |
Z/C 250 | 1,5 | 50,8 | 150 |
2 | 51 | 150 | |
2,5 | 51,3 | 150 | |
3 | 51,5 | 150 | |
Z/C 280 | 1,5 | 50,8 | 180 |
2 | 51 | 180 | |
2,5 | 51,3 | 180 | |
3 | 51,5 | 180 | |
Z/C 300 | 1,5 | 50,8 | 200 |
2 | 51 | 200 | |
2,5 | 51,3 | 200 | |
3 | 51,5 | 200 | |
Z/C 350 | 1,5 | 50,8 | 250 |
2 | 51 | 250 | |
2,5 | 51,3 | 250 | |
3 | 51,5 | 250 | |
Z/C 400 | 1,5 | 50,8 | 300 |
2 | 51 | 300 | |
2,5 | 51,3 | 300 | |
3 | 51,5 | 300 |
Types and arrangement of holes in the Z/C type sections is basically free and we present them on sample drawings.
Metallic coatings
Cold -headed construction profiles of the Z, C and σ type are made of cold -plated steel.
The large variety of strength parameters of the sections allows you to optimally select the amount of material needed.
Before you, the last episode of our series of Craft. Over the past 13 weeks, every […]
Read moreArtur Falkowski, well known to our viewers, will again stand in front of the camera to […]
Read moreThe drainage system is an integral part of the roofing. Well -installed prevents the foundations preventing […]
Read more