Elbow
A fitting for connecting downpipes, an elbow. Material: galvanized sheet metal, stamped and profiled.
Technical specification
Cross-section
NIAGARA Galvanized drainage system components. The elbow allows you to change the direction of the drain and reroute downpipes to other locations. The components of the NIAGARA Galvanized system are manufactured from the highest-quality steel, hot-dip galvanized with a protective zinc coating of at least 275 g/m².
Availability and Sizes
Thanks to its wide range of sizes and specialized components, the NIGARA gutter system offers extensive flexibility in adapting the system to the specific needs of a project. To view the full product lineup and check availability, please refer to the list below:
AVAILABILITY AND SIZE CHART: NIAGARA ROUND NO FASCIA
Available sizes
| Diameter | Length |
|---|---|
| 90 | |
| 100 | |
| 120 | |
| 150 |
Recommendations
Transport and StorageGutters, pipes, and other system components must be transported in clean, dry, and covered vehicles. They must not get wet during transport and storage, as contact with water can trigger the initial stage of the patination process, characterized by the formation of a white film on the surface of the material.
- Short-term storage: On the construction site, gutters, pipes, and other system components should be stored on pallets in their original packaging, under a roof. It is essential to protect the components from getting wet until they are installed.
- Long-term storage: Rooms used to store components made of galvanized sheet metal should be dry and well-ventilated, and the temperature inside them must not fall below 0°C. Stored materials must be protected from moisture and kept separate from active chemicals.
Gutters, pipes, and other system components must be transported in clean, dry, and covered vehicles. They must not get wet during transport and storage, as contact with water can trigger the initial stage of the patination process, characterized by the formation of a white film on the surface of the material.
- Short-term storage: On the construction site, gutters, pipes, and other system components should be stored on pallets in their original packaging, under a roof. It is essential to protect the components from getting wet until they are installed.
- Long-term storage: Rooms used to store components made of galvanized sheet metal should be dry and well-ventilated, and the temperature inside them must not fall below 0°C. Stored materials must be protected from moisture and kept separate from active chemicals.
Available colors (finish)
Color/shade—depends on the raw material and comes in only one option: metallic zinc.
Galvanized
The Pruszyński Company guarantees that each individual order will be produced in the same color (shade). However, due to the complexity of the coating processes, slight variations in shade may occur between individual shipments.
Accordingly, liability for color is limited to a single shipment.
Therefore, when reordering sheet metal for a specific batch, please be sure to indicate on the order form or inform your sales representative that this is a follow-up order and to provide a color sample.
To ensure color consistency between sandwich panels and other components, such as flashings, they should be ordered from a single supplier.
Product Description
NIAGARA Galvanized
NIAGARA GALVANIZED GUTTERS—a product our customers have long awaited—are now available for purchase. This system is an economical version of the NIAGARA coated gutters, which are well-known and highly regarded by roofers.
As noted above, NIAGARA OCYNK is a product that offers a more attractive price while retaining the key advantages of NIAGARA gutters. The system is available in eight sizes (gutter / downspout). The sheet metal used in its manufacture is 0.6 mm thick, and the zinc coating is 275 g/m².
The NIAGARA Galvanized Gutter System Elbow is a component used to change the direction and reroute the drainage system, as well as to connect downpipes at an angle other than a right angle.
Tags
NIAGARA System Components: Round (Galvanized)
System configurations
Types of Systems
The versatile application of NIAGARA steel gutters makes them available in many configurations, tailored to various types of buildings. The choice of system depends on the type of construction and the roof area. Depending on the roof area, dual-pipe systems can be used to optimize water drainage efficiency. It is worth noting that not all of our systems are available in every configuration. The systems that offer the widest range of options are: NIAGARA Round and NIAGARA Galvanized
Single-Family Housing
Industrial Construction
Pruszyński Sp. z o.o
Sokołów, 05-806 Komorów
ul. Sokołowska 32b
Tel. (48-22) 738 60 00
Fax (48-22) 738 61 01
Infolinia: 880 222 444