Browse the page as: Distributor
MENU
Wkręty samowiercące typu OCW do łączenia blach i cienkich konstrukcji do 3 mm

OCW self-drilling screws (with flat heads)

OCW screws for fastening sheet metal up to 3 mm thick. Available lengths: 35 mm and 19 mm.

Product Description

Łączniki do paneli dachowych i paneli Karo

Screws for panels and Karo panels

We secure the panels to the structure using special flat-head screws, depending on the substrate

  • wooden slats – 4.8 x 35
  • metal patches – 4.8 x 19
  • 4.8 x 19 self-tapping screws for fastening panels together and securing flashings

Technical specification

Flange Sizes

OC-type self-drilling screws for fastening sheet metal and thin structures
SIZE4.8 x 19 to 55 mm
DESCRIPTIONReduced drill point, drilling capacity 3.0 mm

Washer: steel/EPDM

Color: RAL

COVERAGE persquare meter4–6 pieces per m²

 

Colour

RAL 7000
RAL 7000
RAL 7016
RAL 7016
RAL 7035
RAL 7035
RAL 8004
RAL 8004
RAL 9002
RAL 9002
RAL 9005
RAL 9005
RAL 9006<br><span style="font-size: 7pt;">SREBRNY</span>
RAL 9006
SREBRNY
RAL 9007<br><span style="font-size: 7pt;">SREBRNY METALIK</span>
RAL 9007
SREBRNY METALIK
RAL 9010
RAL 9010

Online Orders

Use our system

ONLINE ORDERING SYSTEM

Do you have any questions?

Does the roof need maintenance?
Yes, every roof requires periodic inspections to check for any damage. Most products offered by the Blachy Pruszyński Company are available with various types of specialized coatings (covered by Warranty) that increase the service life and durability of metal roofing. Maintenance mainly involves removing soot and chimney dust, which, if left for an extended period, can damage the metal sheeting. Particular attention should be paid to the areas around chimneys, which are critical due to more demanding operating conditions. If localized damage to the paint coating is noticed during an inspection of the roofing, touch-up painting should be performed. In such situations, the best solution is to use dedicated touch-up paints matched to the specific coating. The Blachy Pruszyński Company offers such paints as part of its regular product line, and it is strongly recommended to use the company’s products that are recommended for the specific coating.
Is it possible to install copper flashings on a steel roof?
Caution must be exercised when using copper, as copper oxides are highly corrosive and cause corrosion of other metals. For this reason, it must not be combined with other types of metals on buildings (copper reacts upon contact and causes electrolytic corrosion of other metals).
Can I use an angle grinder to cut sheets?
Modern roof coverings preclude the use of angle grinders for cutting. Using this method to cut the material will void the Warranty.
An angle grinder generates a great deal of heat during operation and cutting, which in turn damages the edges of the sheet metal as well as its protective coating. Additionally, the metal shavings produced during operation become embedded in the sheet metal’s surface, creating potential corrosion sites.
The proper way to cut sheet metal is to use automatic nibblers or hand shears. These tools use mechanical force to cut the sheet metal without exposing it to extreme temperature fluctuations. Additionally, it’s worth remembering that after cutting, it’s a good idea to protect the cut edges with a dedicated protective varnish or special paint.
Why are metal roof tiles recommended for renovating old roofs?
This is directly related to its light weight. In the case of old roofs, the roof trusses of renovated houses are often already somewhat worn down by time. Therefore, it is safer to use metal roof tiles, which weigh around 4.7 kg/m², rather than ceramic roof tiles, which are nearly ten times heavier. However, it’s always a good idea to have a specialist inspect the condition of the roof truss and confirm whether it requires renovation or replacement after all. In such cases, the safety of the building’s residents or employees, as well as the installation crew, is always the top priority. In most situations, however, the condition of the structure allows for the use of metal roof tiles without major issues, whereas the use of ceramic roof tiles would no longer be possible.
How can I advertise a product? Where can I find more information?
Complaints should be filed at the wholesale store where the purchase was made. If the wholesale store in question has closed (is no longer in business), the completed complaint form should be sent directly to Pruszyński Company at the following address: pruszynski@pruszynski.com.pl

A complaint form is available in the "Downloads / Forms" section or directly here: COMPLAINT FORM
How to register and how does the warranty work?
In order to register the warranty, download the warranty registration available in files for download / printing or directly:
Warranty registration and send it completed to the following address: guarantee@pruszynski.eu

The warranty begins to apply on the day of purchase of the goods. Registration of warranty is necessary to quickly identify the purchased batch of goods.
Trapezoidal sheets

You might be interested in this:

Trapezoidal sheets

View the offer

More in this category

Wkręty samowiercące typu TORX TORX screws for joining steel sheets
Screws for roof panels and KARO panels / Screws for roof tiles
See product
Wkręty samowiercące typu - PREMIUM (30 lat gwarancji) PREMIUM Self-Drilling Screws
Connectors for roof panels and KARO panels
See product
Wkręty samowiercące typu OD FARMER OD FARMER Self-Drilling Screws
Connectors for roof panels and KARO panels
See product
Wkręty samowiercące typu TORX TORX self-drilling screws (staples)
Screws for roof panels and KARO panels / Screws for roof tiles
See product

Articles

CSR, Sponsoring sportowy
Students from the Academy of Technology and the Arts Visit Blachy Pruszyński Company

On October 14, students from the Academy of Technology and Arts visited the Blachy Pruszyński Company headquarters in Sokołów. The program included a presentation of the company and its offerings, a session on the Academy of Crafts, and a tour of the production facility.

Read more
CSR, Sponsoring sportowy
The TAURON Women's League has kicked off its new 2026–2027 season

The 2026/2027 season in Polish volleyball has already begun. The TAURON Women’s League has kicked off, and the first match resulted in a spectacular victory for PGE Budowlani Łódź. On October 16, the men’s teams will also join the competition; following a name change, they will now play in the TAURON League.

Read more
CSR, Sponsoring sportowy
Byśkiniewicz and Jastrzębski Are the Second-Place Finishers in the 2026 RSMP Polish Championships

The 2026 season brought Łukasz Byśkiniewicz and Łukasz Jastrzębski a string of strong results and a spot on the podium in the RSMP overall standings. They finished the final Wisła Rally in 3rd place, securing the title of Second Polish Vice-Champions.

Read more